X-LAP

Quality and rigidity. Stopwatch-type lap timer.

SPECIFICATIONS:

Self-timing lap timer for easy measurement while riding. It quantifies the results of daily practice and differences in speed due to differences in settings, contributing to efficient skill improvement. The timer is designed to be simple and easy to understand, and does not use any GPS or wireless devices, but only a wired button. There is no need to equip expensive gadgets such as smartphones. Repeated test runs mainly on off-road courses have resulted in push buttons that are easy to push and bar pad covers that can handle muddy water.

• Size : DC12V
• Power consumption: 28.6mm type: 164×94×65 / Brace type : 240×83×50
• Weight : 28.6mm type：259ｇ / Brace type：261ｇ
• Material : Monitor - ABS plastic / Push button switch - TPU plastic / Bar Pat - EVA Resin
• Contents : 28.6mm type: Monitor, push button switch, dedicated bar pad . Brace type: Monitor, push button switch, dedicated bar pad Anti-turn clamp

【28.6mm type】

• Monitor: 1
• Push button switch: 1 piece
• Dedicated bar pad: 1 piece

【Brace type】

• Monitor: 1
• Push button switch: 1 piece
• Dedicated bar pad: 1 piece
• Anti-rotation clip: 2 pieces

【Please note】

• A protective film is attached to the monitor. 　Please remove the protective film when using.
• Washing a bike using a high-pressure washer on this product may cause a malfunction.
• If the monitor itself is left in a heat condition for a long period of time, the LCD display may be damaged.

　　　

Type	Part Number
28.6mm Type	ZR60-2510
Brace Type	ZR60-2520

	A large LCD monitor is used to check lap times while riding.
	In addition to lap times, the monitor displays the number of laps, total time, best lap time, and clock. All necessary information can be checked at a glance while riding.
	Two modes are available. Lap mode - measures time for each lap (up to 99 laps can be measured) Interval mode - measure interval times (up to 50 laps)
	Measurement is done with a push-button switch mounted next to the grip, allowing measurement without taking hands off the handlebars. The push-button switch is positioned for ease of operation, allowing the rider to concentrate on riding.
	Clamp width is 10.5mm, Clamp diameter is 22.2mm. Because of its versatility, it can be used for a wide range of applications, including off-road motorcycles, mini-bike racing, and moto gymkhana, depending on ingenuity.
	All parts, including the main unit, push-button switch, and wiring coupler, are IP55 rated (waterproof and dustproof). It demonstrates stable performance even under harsh conditions such as motocross and enduro racing.
	In addition, the bar pad cover prevents the main body from getting directly wet and can be used for riding in the rain.
	Battery is not included. Please purchase separately. Compatible battery "CR2032" type: 1 pc.

Replacement Parts :

	Monitor + push button switch Part Num : ZR60-2580
	Push button switch only Part Num : ZR60-2630
	28.6mm type bar pad Part Num :  ZR60-2610
	Brace type bar pad (2 anti-rotation clips included) Part Num : ZR60-2620